SSB AF FILTER
by Harry Lythall - SM0VPO

Typical QRP receivers include Direct Conversion (DC) and simple Superheterodyne types. These receivers often have quite a wide AF bandwidth which can make inteligiblity somewhar restricted, especially under difficult QRM conditions. Many commercial amateur transcievers also suffer from this t.ex the Yaesu FT101B.

This is a simple filter that restricts the LF response a little as well providing quite a heavy HF roll-off. The prototype has enhanced a Yaesu FT101B that was only fitted with an AM IF filter. The IC is an LM358. Construction needs no detailed description. Layout is not critical.

Dont forget to visit my messageboard if you have any questions about this or any other project. I always look forward to receiving feedback, positive or negative. You do not have to register to post messages.

Very best regards from Harry Lythall
SM0VPO (QRA = JO89WO), Märsta, Sweden.
EA/SM0VPO (QRA = IM86BS), Nerja, Spain.

Return to INFO page